Keypad Instruction
Figure 3-1 Keypad instruction
You can check the following list which introduces the IP phone’s keypad in detail:
Table 3-1 Key on the keypad
Event Status
Indication LED
It will show the event status of the video phone. For more details
you can refer to “LED Instruction”.
Indicates the power supply status.
When VP-2009(P) Elite is powered on, the indicator is on.
When VP-2009(P) Elite is powered off, the indicator is off.
On the video conversation, open or close the local video.
In the standby state, press this key to access the page where
numbers that you have dialed are listed. Select a record and press
this key again to initiate a call.
To Next Page
Loading...
