Yealink VP-2009 - Video

IP Video Phone Configuring VP-2009(P) Elite
- 26 -
Figure 5-14 DSS key setting
Table 5-4 The parameter specification chart of each option
Parameter
Description
DSS Key 0X
To display the serial number of the DSS Key.
Type
To choose what function the required DSS key to be set. The
default type is “N/A”, namely no function set.
Line
To choose which line the function applies to.
Label
User-defined name displayed in the DSS Key interface.
Value
To input the corresponding configuration value, e.g. to input the
number in Speed Dial
Extension
To input feature code. Now it is only required by BLF.
Line
To set the line type of the DSS Keys, when you click this DSS key, the phone will enter the dial interface of this line
directly
To set the DSS Key as Line, proceed as follows:
Step 1
Click the “Type” option, and then choose “Line” option in the pull-down menu;
Step 2
Choose the line to be configured in the pull-down menu of the “Line” option. If you choose “Auto”, the
default account at present is adopted;
Step 3
Click the <
Save
>.
Speed Dial
To set the Speed Dial type of the DSS Keys, when you click this DSS key, the phone will dial out the number directly.
To set the DSS Key as Speed Dial, proceed as follows:
Step 1
Click the “Type” option, and then choose “Speed Dial” option in the pull-down menu;
Step 2
Choose the line to be configured in the pull-down menu of the “Line” option. If you choose “Auto”, the
default account at present is adopted;
Step 3
Input the “Label”.
Step 4
Input the Speed Dial number to be configured in the “Value” field.
Step 5
Click the <
Save
>.