Yealink VP-2009

IP Video Phone Configuring VP-2009(P) Elite
- 22 -
Reset to the factory
When there is something wrong or irrational with certain functional configuration of the phone, you can choose the
factory reset to resume the initial configuration.
To reset to the factory, proceed as follows:
Step 1
Access the
Settings
page.
Step 2
Click the <
More
>.
Step 3
Click [
Reset
].
Step 4
Input the administrator password, and then click the icon to confirm the operation;
Step 5
A dialog will be popped up to check whether to reset the phone. Click the icon to confirm the
operation.
Figure 5-9 Reset to the factory
Reboot
To reboot the phone, proceed as follows:
Step 1
Access the
Settings
page.
Step 2
Click the <
More
>.
Step 3
Click [
Reboot
].
Step 4
Input the administrator password, and then click the icon to confirm the operation;
Step 5
A dialog will be popped up to check whether to reboot the phone. Click the icon to confirm the
operation.