Yealink VP-2009

IP Video Phone Configuration Using the Web Browser
- 44 -
Account Tab Page
Account
On the Account tab page, you can configure information for a VP-2009(P) Elite's account such as registration and
deregistration, as shown in Figure 6-3:
Figure 6-3 Account tab page
Table 6-2 Parameters on the Account tab page
Parameter
Description
Register Status
Status of the account that you select.
The options are Registered, Disabled, Unknown, and
Register Fail.
Account Active
Whether to activate the account.
The default value is Disabled.
Display Name
Calling party name that is displayed on the LCD of the called
party.
User Name
Account name that is specified by the VoIP service provider.
The value is similar to a phone number or is a phone number.
Only the administrator can set this parameter.
Register Name
Account name that is specified by the carrier.
Only the administrator can set this parameter.