Yealink VP-2009

IP Video Phone Configuring VP-2009(P) Elite
- 29 -
Step 2
Click [
Hotline
].
Step 3
Enter the hot line number and set hot line delay.
Step 4
Click the <
Save
>.
Figure 5-17 Hotline
Forward
VP-2009(P) Elite supports three call forward modes: Always Forward, Busy Forward, and No Answer Forward. If
auto-forwarding is under no requirement, you can forward your call to a third party through manual operation.
To configure the call forward function, proceed as follows:
Step 1
Access the
Call Feature
page.
Step 2
Click [
Forward
].
Step 3
Select a call forward mode.
Step 4
Enter the forwarded-to number.
If you set the call forward mode to No Answer Forward, you must set After Ring Times.
Step 5
Click the <
Save
>.