Yealink VP-2009

IP Video Phone Configuring VP-2009(P) Elite
- 15 -
Parameter
Description
--User Name
Account name that is specified by the VoIP service provider. The
value is similar to a phone number or is a phone number.
--Password
Password corresponding to Register Name. The value is provided
by the service provider.
--Server
IP address or domain name of the SIP server that is specified by the
VoIP service provider.
--Port
Port number of the SIP server. The default value of VP-2009(P)
Elite is 5060.
Enable STUN
Whether to activate the STUN Server.
--Server
IP address and domain name of the STUN server.
--Port
Port number of the STUN server. The default value is 3478.
Enable Outbound
Whether to enable the outbound proxy server.
--Server
IP address or domain name of the outbound proxy server.
--Port
Port number of the outbound proxy server. The default value is
5060.
Set the Network
To configure the Network on the LCD, proceed as follows:
Step 1
Access the
Settings
page.
Step 2
Click [
Network
]
Step 3
Enter the administrator’s password (the default password is
admin
).
Step 4
Click the , enter the configure page.
Step 5
Configure the Network’s parameter.
Step 6
Click the
<Save>
.
Figure 5-2 WAN