Yealink VP-2009 - Anonymous Call

IP Video Phone Configuring VP-2009(P) Elite
- 28 -
Table 5-5 The parameter specification chart of each option
Parameter
Description
Display Name
User-defined name displayed below the picture.
Account
To set the applicative account. If you choose “Auto”, the default
account at present is adopted.
Phone Number
To set the automatically calling-out phone number
Contact Picture
Box
To choose the applicative picture. Users also can upload pictures
through auto provision. You can consult your system administrator
for more details about “Auto Provision”.
Voice Mail
The voice mailbox is stored on the Media Resource Server (MRS). You can use VP-2009(P) Elite to connect to the
server to obtain voice messages.
After receiving a new voice message in the standby state, VP-2009(P) Elite displays a notification on the screen. If you
have configured a voice mailbox access code, click the icon to access the voice mailbox.
To Set the Voice Mailbox Access Code, proceed as follows:
Step 1
Access the
Call Feature
page.
Step 2
Click [
Voice Mail
].
Step 3
Set the access code of your voice mailbox of the corresponding account.
Step 4
Click the <
Save
>.
Step 5
After the settings are finished, when there is a new voice mail, you can directly click the icon in the
configuration interface to acquire your voice mail information with access to the mailbox server.
Figure 5-16 Voice mail setting
Hotline
The hot line function works when users pick up the handset or press the speaker key but do not dial any numbers or
hang up within the preset duration.
To set the hot line, proceed as follows:
Step 1
Access the
Call Feature
page.