Figure 5-10 Reboot
Screen Calibration
To Screen Calibration, proceed as follows:
Step 1
Access the
Settings
page.
Step 2
Click [
Calibration
].
Step 3
A dialog will be popped up to check whether to begin the calibration. Click the icon to confirm the
calibration operation;
Step 4
Clicking the mark “+” for around 3 seconds, then the calibrating spot will be automatically skipped to the
next one;
Step 5
When the 5 calibrating spots are finished, a dialog will be popped up to check whether to calibrate the screen
accordingly. Click the icon to confirm the operation or click “Again” button to make a
re-calibration;
Step 6
If the calibration failed, you need to restart a new one;
Step 7
If there is no operation in 30 seconds during the calibration, the process will exit automatically
To Next Page
Loading...
