Yealink VP-2009

IP Video Phone Configuring VP-2009(P) Elite
- 9 -
4 Customizing Your Phone
Powering Up the Video phone
Step 1
Plug a Network cable into the network port.
Step 2
Plug in power.
Step 3
It takes about 2 minutes to boot up the video phone. During this period, please do not touch any keys or turn
off the video phone.
The Idle Interface
The phone has 4 idle interfaces (Standby state, Main menu, Picture Dial and DSS Key). In the idle interface, user can
press left/right key to switch the idle interface, also can slide the fingers on the screen to switch the idle interface.
Standby state
Figure 4-1 Standby state
Table 4-1 Area instruction
Area
Description
1
This area is showing the default account. User can click the
account to choose the default account.
2
This area is showing the phone’s time.
3
This area is showing the phone feature status. For more information
you can refer to “Icon Instruction”.