IP Video Phone Configuration Using the Web Browser
Password corresponding to Register Name. The value is
provided by the service provider.
SIP server's IP address or domain name, which is provided by
the VoIP service provider.
Port number of the SIP server. The default value of
VP-2009(P) Elite is 5060.
Enable Outbound
Proxy Server
Whether to enable the outbound proxy server.
IP address or domain name of the outbound proxy server.
The outbound proxy server helps signals and media data pass
the firewall or implement NAT traversal.
Port number of the outbound proxy server. The default value is
5060.
Whether to enable NAT traversal.
IP address or domain name of the STUN server.
Port number of the STUN server. The default value is 3478.
Voice mailbox access code.
The options are UDP, TCP, TLS, and DNS-SRV.The values
UDP, TCP, and TLS are SIP transmission methods, in which
TLS indicates encrypted transmission. The value DNS-SRV
indicates that an IP phone determines the transfer type (UDP,
TCP, or TLS) based on the information in the DNS SRV
record sent by the server.
Whether to enable anonymous call.
To input the on code for anonymous call.
To input the off code for anonymous call.
Whether to enable auto answer.
If you select Enabled, incoming calls are automatically
connected for the current account.
Select the type about Auto Answer function in this field.
Ring tone of the current account.
Select the preferred call type
Set enable or disable the local video when user during the
Video conversation.
Whether to record missed calls.
If you select Disabled, VP-2009(P) Elite does not record calls
that you miss.
To Next Page
Loading...
