Yealink VP-2009 - Page 57

IP Video Phone Configuration Using the Web Browser
- 51 -
Table 6-6 Parameters on the Internet Port (WAN) tab page
Advanced
Figure 6-8 Network advanced page
Table 6-7 Parameters on the Advanced tab page
Parameter
Description
DHCP
If you select the DHCP check box, VP-2009(P) Elite
automatically attempts to connect to the DHCP server for
obtaining resources such as the IP address, subnet mask,
gateway, and DNS server information.
Static IP Address
If you click the Static IP address option button, you must
manually set network parameters including IP Address,
Subnet Mask, Default Gateway, Primary DNS, and
Secondary DNS. For details about these parameters, contact
the network administrator.
--IP Address
VP-2009(P) Elite's IP address.
--Subnet Mask
VP-2009(P) Elite's subnet mask.
--Default Gateway
Default gateway of VP-2009(P) Elite.
--Primary DNS
IP address of the primary DNS server.
--Secondary DNS
IP address of the secondary DNS server.
PPPoE
If the xDSL modem is used, you can connect VP-2009(P)
Elite to the network in PPPoE mode. For details about the user
name and password, contact the network service provider.
--User
User name that is specified by the network service provider.
--Password
Password that is specified by the network service provider.
Parameter
Description