Yealink VP-2009

IP Video Phone Configuration Using the Web Browser
- 59 -
Table 6-12 Parameters on the Door Phone tab page
IP Camera
Figure 6-15 IP camera
Table 6-13 Parameters on the IP Camera tab page
Parameter
Description
Door Phone List
Select a Door Phone which you want to configure in this list.
Device Model
Select the device model
Display Name
Set the display name which you want to display.
Phone Number
To input the phone number of Door Phone. For more
information you can consult your system administrator.
Unlock PIN
Set the password depends on Door Phone. If the door phone
has been set a password, when you want to open the door, you
must input the password at first. For more information you can
consult your system administrator.
Refuse New
Incoming Call
Whether to reject the incoming calls during the door phone
conversation.
Parameter
Description
IP Camera List
Select a IP Camera which you want to configure in this list.
Device Model
Select the device model
Display Name
Set the display name which you want to display.
Phone Number
To input the phone number of IP Camera. For more
information you can consult your system administrator.