Yealink VP-2009

IP Video Phone Configuration Using the Web Browser
- 67 -
Trusted Certificates
To upload a trusted certificate, proceed as follows:
Step 1
Click
Browse
in the
Trusted Certificates
area and select a trusted certificate in the dialog box that is
displayed.
Step 2
Click
Upload
.
Step 3
Choose enable or disable this function in the “
Only Accept Trusted Certificates
”.
If Enabled is selected, the imported root certification is used to authenticate the signature in
the server certificate. If the authentication fails, the IP phone stops communicating with the
server.
If Disabled is selected, the IP phone always communicates with the server even if the trusted
certificate does not exist or is incorrect.
Figure 6-22 Trusted certificates
Server Certificates
To upload a server certificate, proceed as follows:
Step 1
Click
Browse
in the
Server Certificates
area and select a server certificate in the dialog box that is
displayed.
Step 2
Click
Upload
.