Administrator’s Guide for W60P DECT IP Phones
152
handsets.
Navigate to:
http://<phoneIPAddress>/servlet?p=fe
atures-general&q=load
Details of Configuration Parameter:
base.active_handset.number
Description:
Configures the max number of active handsets.
Note: If you change this parameter, the DECT IP phone will reboot to make the change take
effect.
Web User Interface:
Features->General Information->Number Of Active Handset
Handset User Interface:
None
To configure number of active handsers via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Number Of Active Handsets.
3. Click Confirm to accept the change.
Number of Simultaneous Outgoing Calls
Number of simultaneous outgoing calls allows you to configure the max number of