Administrator’s Guide for W60P DECT IP Phones
286
3. Select the desired value from the pull-down list of Retransmission.
4. Click Confirm to accept the change.
Reboot in Talking
Reboot in talking feature allows base station to reboot during an active call when it receives a
packet.
Procedure
Reboot in talking can be configured using the following methods.
Configure reboot in talking.
Parameter:
features.reboot_in_talk_enable
Configure reboot in talking.
Navigate to:
http://<phoneIPAddress>/servlet?p=fe
atures-general&q=load
Details of Configuration Parameter:
features.reboot_in_talk_enable
Description:
Enables or disables the base station to reboot during a call when it receives a packet.
0-Disabled
1-Enabled
Web User Interface: