Administrator’s Guide for W60P DECT IP Phones
x
The following web user interface takes Features->Forward&DND as an example:
Method 3: Handset User Interface
An administrator or a user can configure and use DECT IP phones via handset user interface.
Not all features are available on handset user interface. You can only access some features
when the handset disconnects with the base station.
Recommended References
For more information on configuring and administering other Yealink products not included in
this guide, refer to product support page at Yealink Technical Support.
To access the latest Release Notes or other guides for Yealink DECT IP phones, refer to the
Document Download page for your phone at Yealink Technical Support.
If you want to find Request for Comments (RFC) documents, type
http://www.ietf.org/rfc/rfcNNNN.txt
(NNNN is the RFC number) into the location field of your
browser.
For other references, look for the hyperlink or web info throughout this administrator guide.
Understanding VoIP Principle and SIP Components
This section mainly describes the basic knowledge of VoIP principle and SIP components, which
will help you to have a better understanding of the phone’s deployment scenarios.