Introduction
ix
Note that some parameters described in this guide contain one or more variables (e.g., X or Y).
But the variables in the parameters described in the CFG file are all replaced with specific value
in the scope of variable. You may need to assign a value to the variable before you search and
locate the specific parameter in the CFG file.
For example, if you want to enable the DND feature for account 1, you need to locate the
account.1.dnd.enable
in the MAC.cfg file and then configure it as required (e.g.,
account.1
.dnd.enable = 1).
The following shows a segment of MAC.cfg file:
Method 2: Web User Interface
As described in the chapter Summary Table Format, you can directly navigate to the specified
webpage to configure the feature. You can also first log into the web user interface, the default
user name and password for the administrator are both “admin” (case-sensitive). Yealink DECT
IP phones support both HTTP and HTTPS protocols for accessing the web user interface. For
more information, refer to Web User Interface on page 83.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
