Yealink W60P Administrator's Guide

Administrator’s Guide for W60P DECT IP Phones
vi
 Chapter 7, “Configuring Security Features” describes how to configure the security
features on DECT IP phones.
 Chapter 8, “Troubleshooting” describes how to troubleshoot DECT IP phones and provides
some common troubleshooting solutions.
 Chapter 9, “Appendix” provides the glossary, time zones, trusted certificates, auto
provisioning flowchart, reference information about DECT IP phones compliant with RFC
3261, SIP call flows and some other function lists (e.g., Time Zones).
Related Documentations
This guide covers W60P DECT IP phones. The following related documents are available:
 Quick Start Guides, which describe how to assemble DECT IP phones and configure the
most basic features available on DECT IP phones.
 User Guides, which describe how to configure and use the basic and advanced features
available on DECT IP phones via handset user interface.
 Auto Provisioning Guide, which describes how to provision DECT IP phones using the
boot file and configuration files.
The purpose of Auto Provisioning Guide is to serve as a basic guidance for provisioning
Yealink DECT IP phones with a provisioning server. If you are new to this process, it is
helpful to read this guide.
 Description of Configuration Parameters in CFG Files, which describes all configuration
parameters in configuration files.
Note that Yealink administrator guide contains most of parameters. If you want to find out
more parameters which are not listed in this guide, please refer to Description of
Configuration Parameters in CFG Files guide.
 y000000000000.boot template boot file.
 y000000000077.cfg and <MAC>.cfg template configuration files.
 Deployment Guide for BroadSoft UC-One Environment, which describes how to configure
BroadSoft features on the BroadWorks web portal and DECT IP phones.
 DECT IP phone Features Integrated with BroadSoft UC-One User Guide, which describes
how to configure and use DECT IP phone features integrated with BroadSoft UC-One on
Yealink DECT IP phones.
When the SIP server type is set to BroadSoft, please refer to these two guides to have a
better knowledge of configuring and using features integrated with Broadsoft UC-One.
For support or service, please contact your Yealink reseller or go to Yealink Technical Support
online: http://support.yealink.com/.

Yealink W60P Specifications

General

Mounting	Desk/Wall
Handset type	Wireless handset
Product type	IP Phone
Product color	Black, Silver
Wall mountable	Yes
Standby time	400 h
AC adapter input voltage	100 - 240 V
Battery technology	Lithium
Headset connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Maximum indoor range	50 m
Maximum outdoor range	300 m
Lines quantity	- lines
Phonebook capacity	500 entries
Number of handles included	1 pc(s)
Display diagonal	2.4 \
Display resolution	240 x 320 pixels
Voice codecs	AMR-WB, G.722, OPUS
Number of melodies	9
Security algorithms	SRTP, SSL/TLS
Networking standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Volume control	Digital
Keypad number of keys	12
Number of function keys	6
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Harmonized System (HS) code	85171800

Weight and Dimensions

Weight	7500 g
Package depth	95 mm
Package width	196 mm
Package height	205 mm
Package weight	8300 g
Base dimensions	100 x 25.1 x 130 mm
Handset dimensions (WxDxH)	53 x 20.3 x 175 mm