Yeastar Technology NeoGate TG Series User Manual

NeoGate TG Series User Manual
51/62
Figure 7-24
Note: We don’t’ recommend configuing this if you are not familiar to the code of
call status from mobile carrier and your IPPBX.
6) Advanced Settings
Figure 7-25
Items
Description
From Field Where to get the caller ID in SIP packet
To Field Where to get the DID in SIP packet
180 Ringing
It is set when the
telecom provider needs.
Usually it is not needed
Remote Party ID
Whether send Remote-Party-ID on SIP header.
Default no.
Allow Guest
Whether allow anonymous registration
extension. Default: no. It’s recommended to be
disabled for security.
Pedantic Enable pedantic parameter. Default: no.
Alwaysauthreject
If enabled, when NeoGate TG rejects “Register”
or “Invite” packets, NeoGate TG always
respond the packets using
“SIP404 NOT
FOUND”. It’s recommended to be enabled for
security.

Yeastar Technology NeoGate TG Series Specifications

General

Brand	Yeastar Technology
Model	NeoGate TG Series
Category	Gateway
Language	English