NeoGate TG Series User Manual
56/62
7.3.2 IP to Mobile
This is the route page specifying how to route the calls from VoIP trunk to
GSM/UTMTS/CDMA channel. There is a default route here, and we can create a
new one or edit the old one. There are two modes for you to configure that also.
Figure 7-31
1) Simple Mode
This is the simple mode. What we need to do is just choose the incoming source
trunk and the destination trunk you want to route the call to, NeoGate will allow
all incoming calls and route it to destination trunk without any modification.
Figure 7-32
http://arttel.ru
https://arttel.ru/shop/3g-shlyuzy/yeastar-neogate-tg800w
To Next Page
Loading...
