Program Command Description Instrument models on which the
command is valid, parameter
ranges, and supported variables.
RESULT WRITE
INT:’########.***’
Specifies a filter name and
savesanalysis results to internal
memory.
’########.***’: file name
RESULT WRITE
EXT:’########.***’
Specifies a file name and savesanalysis
results to internal memory.
’########.***’: file name
RESULT WRITE INT Saves analysis results in
internalmemory. File names are
assignedautomatically.
RESULT WRITE EXT Saves analysis results in
external memory. File names are
assignedautomatically.
RESULT WRITE INT
@@
Specifies a file name and saves
analysis results to internal memory
under the file name specified in the
variable @@.
@@: A$, B$, C$, D$
RESULT WRITE EXT
@@
Specifies a file name and saves
analysis results to floppy disk under the
file name specified in the variable @@.
@@: A$, B$, C$, D$
SEARCH/ANA L1-L2
###
Sets ON/OFF for the analysis function
in the range surrounded by line
markers 1 and 2.
###: ON/OFF
SEARCH/ANAZOOM
AREA ###
Selects ON/OFF for the analysis
function of the display scale range
###: ON/OFF
1: Generalized variables E, O, T, U, and V are valid only for the AQ6370C/AQ6370D/
AQ6375B.
MEMORY
Program Command Description Instrument models on which the
command is valid, parameter
ranges, and supported variables.
SAVE #->MEMORY ** Writes the contents of the selected
TRACE from the specified memory
number.
0 to 63 (1 step)
#: A, B, C, D, E, F, G
SAVE #->MEMORY @ Writes the contents of the selected
TRACE from the memory number in
variable @.
@: E
1
, G, H, I, J, K, O
1
, P, Q, R, S,
T
1
, U
1
, V
1
, X, Y, Z
#: A, B, C, D, E, F, G
RECALL MEMORY **-
>#
Reads the contents of the selected
TRACE from the specified memory
number.
0 to 63 (1 step)
#: A, B, C, D, E, F, G
RECALL MEMORY
@->#
Reads the contents of the selected
TRACE from the memory number in
variable @.
@: E
1
, G, H, I, J, K, O
1
, P, Q, R, S,
T
1
, U
1
, V
1
, X, Y, Z
#: A, B, C, D, E, F, G
CLEAR MEMORY ** Clears trace data in the memory 0 to 63 (1 step)
CLEAR MEMORY @ Clears the trace data in the
memoryspecified by the variable @.
@: E
1
, G, H, I, J, K, O
1
, P, Q, R, S,
T
1
, U
1
, V
1
, X, Y, Z
1: Generalized variables E, O, T, U, and V are valid only for the AQ6370C/AQ6370D/
AQ6375B.
8.3 Program Function Commands
To Next Page
Loading...
