Program Command Description Instrument models on which the
command is valid, parameter
ranges, and supported variables.
WRITE DATA
INT:’########.***’
Specifies a file name and saves
data to internal memory.
’########.***’: file name
WRITE DATA
EXT:’########.***’
Specifies a file name and saves
datato external memory.
’########.***’: file name
WRITE DATA INT Specifies a file name and saves
datato internal memory. File names
are assigned automatically.
WRITE DATA EXT Specifies a file name and saves
data to external memory. File
names are assigned automatically.
WRITE DATA INT @@ Specifies a file name and saves
dataunder the file name specified
by the variable @@ in internal
memory.
@@: A$, B$, C$, D$
WRITE DATA EXT @@ Specifies a file name and saves
dataunder the file name specified
by the variable @@ in external
memory.
@@: A$, B$, C$, D$
DATA DATE&TIME ### Selects ON/OFF of date and time
output.
###: ON/OFF
DATA LABEL ### Selects ON/OFF of label output. ###: ON/OFF
DATA DATA AREA ### Selects ON/OFF of data area
output.
###: ON/OFF
DATA CONDITION ### Selects ON/OFF of measuring
conditions output.
###: ON/OFF
DATA TRACE DATA ### Selects ON/OFF of waveform data
output.
###: ON/OFF
DATA OUTPUT WINDOW
###
Selects ON/OFF of contents
output of the OUTPUT WINDOW
PROGRAM function .
###: ON/OFF
READ TRACE #
INT:’########.$$$’
Assigns a file name to specified
TRACE data and reads it
frominternal memory.
’########.$$$’: file name
#: A, B, C, D, E, F, G
READ TRACE #
EXT:’########.$$$’
Assigns a file name to specified
TRACE data and reads it from
external memory.
’########.$$$’: file name
#: A, B, C, D, E, F, G
READ TRACE # INT @@ Reads TRACE data in the file
namespecified by the variable @@
frominternal memory.
#: A, B, C, D, E, F, G
@@: A$, B$, C$, D$
READ TRACE # EXT @@ Reads TRACE data in the file
namespecified by the variable @@
fromexternal memory.
#: A, B, C, D, E, F, G
@@: A$, B$, C$, D$
READ MEMORY
**INT:’########.$$$’
Specifies a file name and
readsmemory data from internal
memory.
’########.$$$’: file name
0 to 63 (1 step)
READ MEMORY **
EXT:’########.$$$’
Specifies a file name and
readsmemory data from external
memory.
’########.$$$’: file name
0 to 63 (1 step)
READ MEMORY ** INT
@@
Reads memory data in the file
namespecified by the variable @@
frominternal memory.
**: 0 to 63 (1 step)
@@: A$, B$, C$, D$
READ MEMORY ** Reads memory data in the file
namespecified by the variable @@
fromexternal memory.
**: 0 to 63 (1 step)
@@: A$, B$, C$, D$
READ SETTING
INT:’########.$$$’
Specifies a file name and reads
setting data from internal memory.
’########.$$$’: file name
READ SETTING
EXT:’########.$$$’
Specifies a file name and saves
setting data from external memory.
’########.$$$’: file name
READ SETTING INT @@ Reads setting data of the file name
specified by the variable @@ from
internal memory.
@@: A$, B$, C$, D$
8.3 Program Function Commands
To Next Page
Loading...
