YOKOGAWA digitalYEWFLO Series User Manual

<APPENDIX 9. DD MENU>
A9-2
IM 01F06F00-01EN
(2) Transducer Block
Transducer Block (Top menu)
Block Info
| Block Tag
| Tag Description
| Strategy
| Alert Key
| Transducer Directory
| Transducer Type
Block Mode
| Target
| Actual
| Permitted
| Normal
Dynamic Variables
| Primary Value
| | Value
| | Status
| Secondary Value
| | Status
| | Value
| | Secondary Value Unit
| Tertiary Value
| | Status
| | Value
| | Tertiary Value Unit
| Volumetric Flow
| Status
| Value
| Volumetric Flow Unit
Configuration/Calibration
| Block Mode
| | Target
| | Actual
| | Permitted
| | Normal
| Setup Wizard
| General
| | Model
| | Sensor Info
| | | Sensor Type
| | | Sensor Status
| | | Sensor Serial Number
| | | Sensor Range
EU at 100
EU at 0
| | | |
| | | |
| | | | Units Index
| | | | Decimal
| | | Linearization Type
| | | Primary Value Type
| | Primary Value Range
| | | EU at 100
| | | EU at 0
| | | Units Index
| | | Decimal
| | Transducer Calibration Info
| | | Sensor Calibration Method
| | | Calibration Highest Point
| | | Calibration Lowest Point
| | | Calibration Minimum Span
| | | Calibration Unit
| | | Sensor Calibration Location
| | | Sensor Calibration Date
| | | Sensor Calibration Who
| Fluid Condition
| | Fluid Type
| | | Sensor Status
| | | Fluid Type
| | | Thermometer Function
| | Temperature Set
| | | Temparature Unit
| | | Process Temparature
| | | Base Temparature
| | Density Set
| | | Density Unit
| | | Process Density
| | | Base Density
| | Pressure Set
| | | Pressure Unit
| | | Process Pressure
| | | Base Pressure
| | Other Condition set
| | Primary Value Filter Time
| | Deviation
| | First Temperature Coef.
| | Second Temperature Coef.
| | Secondary Value Filter Time
| | Cable Length
| Characterize Meter
| | Size Select
|
|
|
|
Body Type
| | Vortex Sensor Type
| | K-Factor Unit
| | K-Factor Value
| Display Set
| | Upper Display Mode
| | Lower Display Mode
| | Display Cycle
| Adjust
| | Reynolds Adjust
| | Viscosity Value
| | Flow Adjust
| | User Adjust
| | Gas Expansion Fact
| Maintenance
| | Low Cut Flow
| | Trigger Level
| | Noise Balance Mode
| | Noise Ratio
| | Noise Balance Wizard
| | Signal Level
| | Sensor Error Record
| | Flow Velocity
| | Span Velocity
| | Vortex Frequency
| | Span Frequency
| | Fluid Density
| Limit Switch 1 Set
| | Limit Switch 1 Value D
| | | Status
| | | Value
| | Limsw 1 Target
| | Limsw 1 Setpoint
| | Limsw 1 Act Direction
| | Limsw 1 Hysteresis
| | Limsw 1 Unit
| Limit Switch 2 Set
| Limit Switch 2 Value D
| | Status
| | Value
| Limsw 2 Target
| Limsw 2 Setpoint
| Limsw 2 Act Direction
| Limsw 2 Hysteresis
| Limsw 2 Unit
Diagnostics/Alerts
| Block Error
| Transducer Error
| Alarm Perform
| Block Alarm
| | Unacknowledged
| | Alarm State
| | Time Stamp
| | Subcode
| | Value
| Alarm Summary
| | Current
| | Unacknowledged
| | Unreported
| | Disabled
| Update Event
| Unacknowledged
| Update State
| Time Stamp
| Static Rev
| Relative Index
Query Device
TB Profile Parameters
TB Original Parameters(part1)
TB Original Parameters(part2)
TB Original Parameters(part3)
TB Original Parameters(part4)
TB Service Parameters
FA0902.ai
Note: Parameter name may differ according to a tool or host.

YOKOGAWA digitalYEWFLO Series Specifications

General

Brand	YOKOGAWA
Model	digitalYEWFLO Series
Category	Measuring Instruments
Language	English