YOKOGAWA digitalYEWFLO Series

<APPENDIX 10. METHOD>
A10-3
IM 01F06F00-01EN
(2) Noise Balance Wizard Method
Check the Mode.Actual
(automatically judgement)
Display the end message
Set the following parameter:
NOISE_BALANCE_MODE
Display the start message
Noise Balance Wizard Method
END
Display the following parameters:
NOISE_BALANCE_MODE
NOISE_RATIO
TRIGGER_LEVEL
Manual
Auto
O/S
ManualAuto Tuning at zero
Set the following parameters:
NOISE_RATIO
(automatically judgement)
Check the NOISE_BALANCE_
MODE
Tuning at zero
FA1003.ai
(3) Reynolds Adjust Method
Reynolds Adjust Method
Auto
O/S
NOT
ACTIVE
ACTIVE
Display the start message
Display the end message
END
(automatically judgement)
Mode.Actual
Set the following parameter:
REYNOLDS_ADJUST
Set the following parameter:
PROCESS_DENSITY
*1
*1
Set the following parameter:
VISCOSITY
*1: Skip mode including
FA1004.ai