YOKOGAWA digitalYEWFLO Series

<APPENDIX 10. METHOD>
A10-2
IM 01F06F00-01EN
(1) Continued
*1: Skip mode including
Set the following parameter:
BASE_TEMP *1
END
Jump to method of
FLUID_TYPE
Do you want to set the
following parameter:
THERMOMETER_FUNCTION
Set the following parameter:
THERMOMETER_FUNCTION
Set the following parameters:
DENSITY_UNIT
BASE_DENSITY *1
Set the following parameter:
BASE_TEMP *1
Set the following parameters:
FIRST_TEMP_COEF
SECOND_TEMP_COEF *1
Set the following parameters:
PRESSURE_UNIT
PROCESS_PRESSURE
BASE_PRESSURE *1
Set the following parameter:
DEVIATION *1
Set the following parameters:
PRESSURE_UNIT
PROCESS_PRESSURE *1
Jump to method of
FLUID_TYPE
Gas: STD/ Normal
Liquid: MassSuperheat Steam
Monitor Only
Not Use
Set the following parameters:
SECONDARY_VALUE_FTIME
CABLE_LENGTH *1
Saturated Steam
Yes
Setup Wizard terminating
Cancel
(Abort)
Sub-method
THERMOMETER_FUNCTION
No
(Skip)
FA1002.ai