YOKOGAWA DL1640

2-23
IM 701610-61E
SPI-Bus Analysis Function
2
2.6 Communication Commands
:SEARch:SPI:ANALyze:SETup:CLOCk?
Function Queries all settings related to the clock channel of
the SPI analysis conditions.
Syntax :SEARch:SPI:ANALyze:SETup:CLOCk?
Example :SEARCH:SPI:ANALYZE:SETUP:CLOCK? ->
:SEARCH:SPI:ANALYZE:SETUP:CLOCK:
LEVEL 1.000E+00;HYSTERESIS 0.3;
POLARITY RISE
:SEARch:SPI:ANALyze:SETup:CLOCk:
HYSTeresis
Function Sets the clock channel hysteresis of the SPI
analysis conditions or queries the current setting.
Syntax :SEARch:SPI:ANALyze:SETup:CLOCk:
HYSTeresis {<NRf>}
:SEARch:SPI:ANALyze:SETup:CLOCk:
HYSTeresis?
<NRf> = 0.3 to 4.0 (div, 0.1 steps)
Example :SEARCH:SPI:ANALYZE:SETUP:CLOCK:
HYSTERESIS 0.5
:SEARCH:SPI:ANALYZE:SETUP:CLOCK:
HYSTERESIS? -> :SEARCH:SPI:ANALYZE:
SETUP:CLOCK:HYSTERESIS 0.5
:SEARch:SPI:ANALyze:SETup:CLOCk:
LEVel
Function Sets the clock channel level of the SPI analysis
conditions or queries the current setting.
Syntax :SEARch:SPI:ANALyze:SETup:CLOCk:
LEVel {<voltage>}
:SEARch:SPI:ANALyze:SETup:CLOCk:
LEVel?
<voltage>=8 divisions within the
screen (0.01 division steps).
Example :SEARCH:SPI:ANALYZE:SETUP:CLOCK:
LEVEL 1V
:SEARCH:SPI:ANALYZE:SETUP:CLOCK:
LEVEL? -> :SEARCH:SPI:ANALYZE:SETUP:
CLOCK:LEVEL 1.000E+00
:SEARch:SPI:ANALyze:SETup:CLOCk:
POLarity
Function Sets the edge of the clock channel to be analyzed
of the SPI analysis conditions or queries the
current setting.
Syntax :SEARch:SPI:ANALyze:SETup:CLOCk:
POLarity {RISE|FALL}
:SEARch:SPI:ANALyze:SETup:CLOCk:
POLarity?
Example :SEARCH:SPI:ANALYZE:SETUP:CLOCK:
POLARITY RISE
:SEARCH:SPI:ANALYZE:SETUP:CLOCK:
POLARITY? -> :SEARCH:SPI:ANALYZE:
SETUP:CLOCK:POLARITY RISE
:SEARch:SPI:ANALyze:SETup:CS?
Function Queries all settings related to the CS signal of the
SPI analysis conditions.
Syntax :SEARch:SPI:ANALyze:SETup:CS?
Example :SEARCH:SPI:ANALYZE:SETUP:CS? ->
:SEARCH:SPI:ANALYZE:SETUP:CS:CHANNEL4:
MODE 1;LEVEL 1.000E+00;:SEARCH:SPI:
ANALYZE:SETUP:CS:ESTATE LOW
:SEARch:SPI:ANALyze:SETup:CS:
CHANnel4?
Function Queries all settings related to CH4 of the SPI
analysis CS signal conditions.
Syntax :SEARch:SPI:ANALyze:SETup:CS:
CHANnel4?
Example :SEARCH:SPI:ANALYZE:SETUP:CS:
CHANNEL4? -> :SEARCH:SPI:ANALYZE:
SETUP:CS:CHANNEL4:MODE 1;
LEVEL 1.000E+00
:SEARch:SPI:ANALyze:SETup:CS:
CHANnel4:LEVel
Function Sets the level of CH4 of the SPI analysis CS
signal conditions.
Syntax :SEARch:SPI:ANALyze:SETup:CS:
CHANnel4:LEVel {<voltage>}
:SEARch:SPI:ANALyze:SETup:CS:
CHANnel4:LEVel?
<voltage>=8 divisions within the
screen (0.01 division steps).
Example :SEARCH:SPI:ANALYZE:SETUP:CS:
CHANNEL4:LEVEL 1V
:SEARCH:SPI:ANALYZE:SETUP:CS:
CHANNEL4:LEVEL? -> :SEARCH:SPI:
ANALYZE:SETUP:CS:CHANNEL4:
LEVEL 1.000E+00
:SEARch:SPI:ANALyze:SETup:CS:
CHANnel4:MODE
Function Sets whether to handle CH4 as a CS signal (ON/
OFF) in the SPI analysis conditions or queries the
current setting.
Syntax :SEARch:SPI:ANALyze:SETup:CS:
CHANnel4:MODE {<Boolean>}
:SEARch:SPI:ANALyze:SETup:CS:
CHANnel4:MODE?
Example :SEARCH:SPI:ANALYZE:SETUP:CS:
CHANNEL4:MODE ON
:SEARCH:SPI:ANALYZE:SETUP:CS:
CHANNEL4:MODE? -> :SEARCH:SPI:
ANALYZE:SETUP:CS:CHANNEL4:MODE 1