25
IM MY600-01EN
General Specifications
Item Specifications
Applicable standards
Safety standards EN 61010-1, -2-030 CAT III 600 V
IEC 61010-2-034
Pollution degree 2
EN 61557-1, -2, -4, -10
EN 61010-031, JJG1005
98008 CAT III 600 V (with cap)
CAT II 1000 V (without cap)
CAT II 1000 V (without 99013)
98009 CAT III 600 V (with alligator clip)
CAT II 600 V (with flat test bar)
* When probes, sometimes with metal tips, are
used with the instrument, the measurement
category and voltage rating of the lowest rated
item is applied.
EMC EN 61326-1 Class B
EN 61326-2-2
EMC Regulatory Arrangement in Australia and
New Zealand EN 55011 Class B, Group 1
Korea Electromagnetic Conformity Standard
( 한국 전자파적합성기준 )
Location of use Altitude 2000 m or less, in-door use
Nominal system
voltage
600 V
Nominal voltage of the distribution system
that can be measured with this instrument
(IEC61557)
Operating
temperature and
humidity
-10°C to +50°C, 80% or less (no condensation)
Storage temperature
and humidity
-20°C to +60°C, 75% or less (no condensation)
Withstand voltage Between electrical circuit and case
5160 V AC (50/ 60 Hz)/ 5 s
Insulation resistance Between electrical circuit and case: 50 MΩ or
more/ 1000 V DC
Recommended
calibration period
1 year
To Next Page
Loading...
