60
IM MY600-01EN
Shortcut Operation
If you press MEMORY anywhere in steps 3 to 5, you can
save the data by skipping the SITE No. 1, 2, and data
number settings. If you do, the same numbers as the
previous save operation are used for SITE No. 1 and 2,
and the data number is incremented by 1.
Recalling Measured Results
1.
Hold down MEMORY for at least 1 second in standby
mode.
2.
The saved data appears.
Press the arrow keys to select the data number you
want to view.
Blinking
3.
Press SELECT. The site number appears. Press
SELECT again to return to the measured value screen.
4.
Press ESC. The instrument returns to the standby
screen.
To Next Page
Loading...
Need help?
General
