YOKOGAWA SC200 - Access to Service Settings

IM 12D7B2-E-H
29
ESCAPE TO MEASURE can be used at any stage to abort operation. WARNING: If the HOLD function is activated the instrument returns with the question HOLD (flashing);
answer YES or NO or MODE again to return to measurement.
7-2. Access to service settings
*SERV = Service settings
Display will show *CODE Display shows current setting
Values adjusted access to individual routine
description
1. Access service 2. Enter code to select
required function
3. Adjust setting
(see individual routines)
OUTPUT
SET HOLD
TEMPERATURE
SERVICE
YES
NO
YES
NO
MODE
*
OUTPUT
SET HOLD
TEMP.
SERVICE
ENT
ENT
OUTPUT
SET HOLD
TEMP.
SERVICE
ENT
ENT
.
.
Access commissioning menu
Select SERVICE
*
Select service function
Move pointer to service
NO
YES
Enter access code to select routine
Select digit to adjust
Adjust code for entry
Confirm choice
ENT
L
L
Adjust settings
Select digit to adjust
Adjust value
Confirm adjusted value
ENT
L
L
Return to measure
MODE
MODE