YOKOGAWA SC200 User Manual

ESCAPE TO MEASURE can be used at any stage to abort operation. WARNING: If the HOLD function is activated the instrument returns with the question HOLD (flashing);
answer YES or NO or MODE again to return to measurement.
IM 12D7B2-E-H
22
5-2. Selecting a value to display
DISP = DISPLAY routine
The second line of the display will show the possi-
bilities
The second line of the display will show the possi-
bilities
1. Access display routine 2. Read data 3. Reprogram data display
MEASURE
CAL
DISPLAY.
HOLD
YES
NO
YES
NO
MODE
MODE
MEASURE
CAL
DISPLAY.
HOLD
YES
NO
YES
NO
MODE
MODE
.
MEASURE
CAL
DISPLAY.
HOLD
YES
NO
YES
NO
MODE
MODE
.
Access maintenance mode
Select Display routine
Select display
Move pointer to DISPLAY
NO
YES
Read data
To read values only
Parameter Unit
- Temperature ˚C/˚F
- Output signall mA
- % by weight %
C.C - Cell constant cm-1
T.R. - Reference
temperature ˚C/˚F
NaCl/jjj - Temperature
T.C Compensation coefficient
standard/manual
%/˚C
REL - software release
Return to measure
NO
MODE
Reprogram data display
Move to desired value for display
Parameter Unit
- Temperature ˚C/˚F
- Output signal mA
- % by weight %
C.C - Cell constant cm
-1
T.R. - Reference
temperature ˚C/˚F
NaCl/jjj - Temperature
T.C Compensation coefficient
standard/manual
%/˚C
REL - software release
To select a value for permanent dis-
play during measurement
NO
YES
MODE
MODE

YOKOGAWA SC200 Specifications

General

Brand	YOKOGAWA
Model	SC200
Category	Transmitter
Language	English