YOKOGAWA VY Series - Wiring

Table 3.2 (3) Installation of Remote Transmitter (VY4A)
Remote transmitter (VY4A) Figure
The remote transmitter is
connected to the remote sensor by
the vortex owmeter signal cable
(VY1C).
When installing the remote
transmitter, install within the
maximum length (50 m) of the
vortex owmeter signal cable
(VY1C).
Stanchion mounting Horizontal pipe mounting
50 mm (2 inch) pipe
Mounting bracket
Nut
AMP side
Cable Entry
<3. Installation>
21
IM 01F07A01-01EN
Installation
3