unrestricted 15
ymn_installing.fm document release 2.2 last updated 3 May 16
YOMANI ML/XR
OWNER MANUAL
Installing YOMANI
You can call a technician or a field engineer to help you install your terminal or you can
do it yourself. If you decide to install the terminal yourself, follow the guidelines below:
• remember that neither Worldline nor its vendor will bear any responsibility or cost for
malfunctioning, breakdowns or any anomaly that may result from incorrect
manipulation of the terminal
• read the Safety information, on page 51, before proceeding with the installation of
your YOMANI
• if you notice that any part of the YOMANI does not fit, blocks or shows any other
malfunction, contact your vendor – do not try yourself to repair or alter it in any way
• use only accessories (mains adaptor, cables and so on) provided by your vendor or
by an approved source
Checking the terminal package
1. Check whether the contents of the package are complete.
You should find at least the following parts:
– YOMANI terminal
– documentation from your vendor
If either of these is missing, contact your vendor immediately.
2. Inspect the package and its contents for damage.
If any of the contents have been damaged, immediately contact your shipping
company and notify your vendor.
3. Check the terminal as described in Security recommendations, on page 37.
Save the cartons and packing material for repacking or moving your equipment in the
future.
Unpacking the optional Merchant Unit
If the configuration of your YOMANI includes a Merchant Unit, open the package labelled
“YOMANI ML/XR Merchant Unit”.
To Next Page
Loading...
Need help?
General
