YOMANI ML/XR
OWNER MANUAL
18 unrestricted
last updated 3 May 16 document release 2.2 ymn_installing.fm
Figure 17. Guiding the cables
Physical surroundings
YOMANI has been designed for use:
• on a flat and stable surface
• at an operating temperature between 0° C and 50° C
• in an operating relative humidity (RH) between 20% and 90%, non-condensing
Always avoid exposing your YOMANI to:
• shocks and vibrations
• excessive heat and dust
• explosive environments
• oil or moisture
• water or condensation
• direct sunlight or objects that radiate heat
• environments where humidity fluctuations might occur
Do not place your YOMANI:
• close to devices that cause excessive voltage fluctuations and/or electromagnetic
fields such as electric motors or high-frequency devices
• less than 80 centimetres away from any low-frequency Electronic Article
Surveillance (EAS) system
To Next Page
Loading...
Need help?
General
