unrestricted 45
ymn_cleaning.fm document release 2.2 last updated 3 May 16
YOMANI ML/XR
OWNER MANUAL
Cleaning YOMANI terminals
This section covers:
• cleaning the equipment
• cleaning the card interfaces
For advice on daily checks, see also Security recommendations, on page 37.
Cleaning the equipment
For optimal functioning, the YOMANI terminal – and any accessories such as contactless
reader, printer, or Merchant Unit – should be kept clean and cleaned regularly.
When cleaning your equipment, proceed as follows:
1. Disconnect the equipment from the power supply.
2. Clean the equipment with a soft damp cleaning cloth.
3. Clean the screen with a cleaning tissue (binderless mixed textile fibre) and display-
and multimedia cleaner; these products should be ordered from a specialised
supplier such as
ECS.
After cleaning, do not forget to re-connect the equipment.
Other detergents, solvents or alcohol may damage the surface of the terminal and render
transparent parts opaque. Make sure that dirt does not enter the card readers.
To Next Page
Loading...
Need help?
General
