Page – 72/75 AFMNA0AA – EPS-BLI HYG – User Manual
Correct cfi files for E-steering version are.
Can Speed Cfi file
Master 125Kbit/s epswm_zp001.cfi
Slave 125Kbit/s epsws_zp001.cfi
A further box reports that the operation has completed successfully.
At this point the CAN bus communication is set. Now the operator has to choose the
correct software (.h86 file) to be downloaded onto the controller (typically the software
to be downloaded in the master microcontroller is called something like
epshtm_xxxxx.h86; the software to be downloaded in the slave microcontroller is called
something like epshts_xxxxx.h86). Select in the ‘File’ sub-menu the ‘Load File” option.
To Next Page
Loading...
