ZCS AZZURRO 1PH HYD3000-ZP1 User Manual

User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.
0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of
27/01/2023 - Application: GID
121/193
10.9. Event list
3. Event list
“Up” ↑
“Down” ↓
1. List of current events
2.List of Historical events
1PH HYD3000-HYD6000-ZP1 inverter event list, including the lists of current and historical events.
1) List of current events
Select “1. List of Current Events”, press “OK” to check the current events.
2) List of historical events
Select “2. List of Historical Events”, press “OK” to check the historical events. Press “Up” or “Down” to check the
historical events if there is more than one page of events.
10.10. Software Update
On first installation, all Zucchetti hybrid inverters must be updated to the latest firmware version found in the
www.zcsazzurro.com w
ebsite, unless the inverter is already updated to the version on the website or to a later
version (see image below).
A
TTENTION!!! Downgrading the firmware version of the inverter could lead to a malfunction.
1PH HYD3000-HYD6000-ZP1 inverters must be upgraded using an 8 GB USB stick.

ZCS AZZURRO 1PH HYD3000-ZP1 Specifications

General

Max. DC Voltage	550 V
Nominal AC Voltage	230 V
DC Connection	MC4
Protection Degree	IP65
Cooling	Natural convection
AC Voltage Range	180-276 V
Max. Efficiency	97.6 %
Operating Temperature Range	-25°C to +60°C
Frequency	50/60 Hz
Efficiency	97.6 %
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit, Over Temperature
Storage Temperature	-40 °C / +70 °C
Humidity	0-100% (non-condensing)