User’s Manual 1PH HYD3000-HYD6000-ZP1
Rev. 1.
0 01/09/2023
Identification: MD-AL-GI-00
Rev. 1.1 of
27/01/2023 - Application: GID
1. Introduction
The 1PH HYD3000-HYD6000-ZSP1 hybrid inverter single-phase household energy storage system consists of
inverter module and lithium battery module. It adopts modular design and can be stacked with building blocks.
The battery capacity varies from 5 to 20 kWh (in case of 4 batteries you need to buy the extension kit, code ZZT-
ZBT5K-EXT-KIT). The system can manage the energy of photovoltaic, battery, utility grid and load according to
the actual application, and realize the optimal distribution of system energy. Multiple working modes are available
to meet diverse needs.
In the event of a power failure (or by switching on the inverter in Off-Grid mode), the 1PH HYD3000-HYD6000-
ZP1 inverter can operate in Emergency Power Supply (EPS) mode. The 1PH HYD3000-HYD6000-ZP1 inverter will
use both the energy created by the photovoltaic panels and the energy stored in the battery to supply energy to
the critical load.
The main features are as follows:
• Stack integrated design, convenient installation, simple maintenance;
• Built-in battery pack equalization management unit to improve battery available capacity;
• Photovoltaic maximum input current 16A, applicable to large current and double-sided module;
• Battery side complete electrical isolation, safer system;
• EPS function to ensure the stable operation of critical load;
• Supports a mixture of new and old batteries;
• Supports battery switch off with a button.
To Next Page
Loading...
Need help?
General
