Routine Maintenance
Adjust Printhead Pressure and Toggle Position
122
P1056468-002 105SLPlus™ User Guide 7/3/13
4.
5.
To lock the toggle pressure, tighten the locking nut against the adjusting nut.
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
Move the adjusting nut until the print quality is acceptable. Use the lowest pressure that
provides the desired print quality.
• To increase printhead pressure, move the adjusting nut downward.
• To decrease printhead pressure, move the adjusting nut upward.
To Next Page
Loading...
