Index
66
P1004197-001 Addendum to the SEH PS105-Z & PS102-Z User Guide 09/03/2008
for Zebra Printers
H
hardware
requirements, 16
I
installation
PS102-Z (internal), 22
PS105-Z (external), 22
ZebraNet View Java Applet, 50
installation types
factory, 18
field, 18
InterCon-NetTool, 46
internal SEH IPv6
specifications, 20
IP address
configuration label, 28
IPv6 address
configuration label, 28
L
LED’s, 31
link indicator, 31
network activity indicator, 31
status indicator, 31
troubleshooting, 54
liability, 2
link indicator
LED, 31
troubleshooting, 54
LOAD FROM EXT? option
view on ZM and RZ printers, 36
LOAD LAN FROM? option
view on other printers, 35
M
MAC address
configuration label, 28
media sizes, 27
N
network activity indicator
LED, 31
network configuration label, 39
network parameters
ACTIVE PRINTSRVR, 35, 36, 38
LOAD FROM EXT?, 36
LOAD LAN FROM?, 35
PRIMARY NETWORK, 36
RESET NETWORK, 35, 37, 38
V53.16.x firmware for S4M, 38
V53.16.x, R53.16.x or later firmware, 36
V60.16.x, R6x.16.x or later firmware, 34
WIRED PS CHECK?, 35
network password
control panel parameters affected, 34, 36
network print server
set as primary network device, 40
not receiving alerts
troubleshooting, 55
O
open
ZebraNet View, 48
overview, 14
illustration, 14
illustration explanation, 15
P
password
effect of network password on control
panel parameters, 34, 36
ping the printer
troubleshooting, 56
power
via parallel port, 31
primary network device
preference for active print server, 40
select for ZM and RZ printers, 36
PRIMARY NETWORK option
select device on ZM and RZ printers, 36
print
configuration label, 27
print problems
troubleshooting, 55
printer compatibility, 17
printers
V53.16.x firmware, 38
V53.16.x, R53.16.x or later firmware, 36
V60.16.x, R6x.16.x or later firmware, 34
PS102-Z
105SL illustration, 25
S4M illustration, 24
Xi Series illustration, 25