Zebra LI2208 - Revision History

iii
Revision History
Changes to the original guide are listed below:
Change Date Description
-01 Rev. A 6/2013 Initial Release
-02 Rev A 9/2013 Updates:
- Updated parameter numbers (decimals).
- Updated Length With Range default values for Code 39, Code 93,
D 2 of 5, and Code 128.
- Belgian French changed to French International (Belgian French).
- Updated Picklist description.
- Updated monthly deep cleaning.
Adds:
- Added note to Troubleshooting section about scanning techniques.
-03 Rev A 1/2014 Updated USB Quick Keypad Emulation.
-04 Rev A 8/2014 - Added USB CDC host note to the USB Interface chapter.
- Added non-parameter attribute numbers (Appendix E).
- Added Communication Protocol Capabilities (Appendix I).
- Updated "notes" for:
- Set Length(s) for Interleaved 2 of 5
- Set Length(s) for Discrete 2 of 5
- Set Length(s) for MSI.
-05 Rev A 12/2014 Zebra Rebranding
-06 Rev A 3/2015 Updated URLs
-07 Rev A 7/2015 Updated Zebra logo & copyright; removed Glossary; updated incorrect PIN
callouts; removed USB Toshiba TEC (not supported).
-08 Rev A 7/2016 Updated Advanced Data Formatting Chapter.