4 - 6 MC55 Integrator Guide
Installation Using AirBEAM
The AirBEAM Smart Client provides backward-compatible legacy AirBEAM functionality and backward-compatible
legacy MSP 2.x Level 2 Agent functionality.
Refer to the AirBEAM Smart Windows CE Client Product Reference Guide, p/n 72-63060-xx, for instructions for
AirBEAM Smart client.
Mobility Services Platform
The MSP 3 Client Software is a set of software components that come pre-installed on the MC55. The MSP 3
Client software consists of the following components:
The RD Client provides support for MSP 3 Staging functionality, provides support for the MSP 3 Legacy Staging
process, and provides support for backward-compatible legacy MSP 2.x Legacy Staging functionality.
The MSP 3 Agent provides MSP 3 Provisioning functionality and Control functionality when used with MSP 3.2
Control Edition.
Refer to the Mobility Services Platform 3.2 User’s Guide, p/n 72E-100158-xx, for instructions for using the Rapid
Deployment and MSP3 Agent clients.
Update Loader Image
Windows Mobile contains an Image Update feature that updates all operating system components. All updates are
distributed as update packages. Update packages can contain either partial or complete updates for the operating
system. Zebra distributes the update packages on the Support Central Web Site, http://www.zebra.com/support
.
To update an operating system component, copy the update package to the MC55 using one of a variety of
transports, including ActiveSync, an microSD card, AirBEAM or MSP.
Download Update Loader Package
1. Go to the Zebra Support Central web site, http://www.zebra.com/support.
2. Download the appropriate update loader package to a host computer.
3. Locate the update loader package file on the host computer and un-compress the file into a separate directory.
ActiveSync
To install an update loader package using ActiveSync:
1. Connect the MC55 to a host computer using ActiveSync. See Chapter 3, ActiveSync for more information.
2. In ActiveSync on the host computer, open Explorer for the MC55.
3. Copy all the update loader package files from the host computer to the \temp directory on the MC55.
4. On the MC55, navigate to the \temp directory.
5. Tap on the update loader file, STARTUPDLDR.EXE. The Update Loader application installs the update loader
package on the MC55.
A progress bar displays until the update completes.
6. The MC55 re-boots.
7. The calibration screen appears.
To Next Page
Loading...
Need help?
General
