MC5574 - GSM Configuration 6 - 7
Security Tab
Enabling a PIN
Figure 6-8
Security Tab
To require a PIN when using the phone:
1. From the Security tab, select the Require PIN when phone is used check box under PIN Security.
Figure 6-9
Enter PIN
2. Use the touch keypad to enter a four to eight digit PIN.
3. Tap Enter to enable the PIN and return to the Phone tab.
Changing a PIN
1. From the Security tab (Figure 6-7), tap Change PIN.
2. Use the touch keypad to enter the current PIN.
NOTE Place emergency calls at any time, without requiring a PIN or a SIM card.
CAUTION If you enter an incorrect PIN, the message “SIM PIN incorrect: Try again” appears. After three consecutive
incorrect attempts, the SIM card is blocked. The phone does not allow you to attempt to enter your PIN
again and you must obtain a PIN Unblock Key from your service provider.
To Next Page
Loading...