ENGLISH
61
BASIC OPERATIONS
The display modes will be changed as follows:
IMAGE SETUP
1. Enter image setup mode
■ Press and hold the [WIDE] key on the front panel or the [PIC]
key on the remote control.
2. Select one item to adjust
■ Press the [Up] or [Down] key repeatedly on the remote control.
3. Adjust the value
■ Press the [Left] or [Right] key repeatedly on the front panel or on
the remote control.
4. Exit image setup mode
■ To exit image setup mode, repeat the first step or stop operation
for some seconds.
RESET THE UNIT
If the unit does not work correctly, you should first try to reset the
unit by pressing the [RESET] button on the front panel.
To Next Page
Loading...
Need help?
General
