EasyManua.ls Logo

ZENEC ZE-MC2000 - Hardware and Control Adjustments

ZENEC ZE-MC2000
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
87
SETUP
Method 2: Using the touch screen
Touch the „Password“ option, opening the numeric keypad,
and then press the numeric buttons to enter your password.
NOTE:
The password is cleared after the parental lock is opened.
2. Change the rating
Select an appropriate rating from the ‚rating‘ menu.
3. Close the parental lock
Enter a new password and confirm to close the parental lock.
LOAD FACTORY
To restore the default settings relating with DVD playback (e.g.:
DVD Audio, DVD Subtitle), press the [RESET] option only.
HARDWARE
CAMERA
Normal: Actual scenes shot by the camera display on the TFT
monitor while reverse driving (just like what you are seeing).
Mirror: The mirror images of actual scenes display on the TFT
monitor while reverse driving (just like looking from the rearview
mirror).
Off: Camera video input is closed.
BT MIC
Internal: The internal microphone is usable. You can talk with sb.
over one call through the internal microphone.
External: The internal microphone is unusable. If you want to talk
with sb. over one call through microphone, you should use the
external mic.
Volume Level
0: The volume is not dependent on the speed of the vehicle. The
speed dependant volume function (GALA) is deactivated.
1, 2 and 3: The volume is dependent on the speed of the vehicle.
The speed dependant volume function (GALA) is activated.
The higher the chosen value the function is more sensitive.
NOTE:
The using of this speed dependant volume function is depen-
dent on your vehicle which must provide the GALA signal.

Table of Contents

Related product manuals