98
INSTALLATION
NOTES OF INSTALLATION
1. Before installation, please make sure proper connections are conducted and the unit operates normally. Please refer to the ‚Electrical
Connections Overall Diagram‘ because improper connection may result in damage to the unit.
2. Use only accessories which are designed and manufactured for this unit because other unauthorized accessories may result in
damage to the unit.
3. Before installation, please fasten all power cables.
4. DO NOT install the unit in places which are close to hot areas to prevent damages to electrical components such as the laser head.
5. To prevent electric spark, connect the positive pole first and then the negative pole.
6. DO NOT block the cooling fan exit to ensure sufficient heating dissipation of this unit, or it may result in damage to this unit.
INSTALLATION PROCEDURES
Please see the attached Installation-guide.
To Next Page
Loading...
