Zero 88 Solution User Manual

23
DeskSetup
Desk Setup
Figure 21 - Desk Setup
The Desk Setup function allows you to congure or customise the settings on the desk to your own requirements.
Desk Setup is divided into a number of different sections which are accessed by pressing the corresponding MFK
or soft button on the monitor.
A summary of the Desk Setup options is provided below. For further details of the various options refer to the Setup
chapter in the full User Manual.
• Displays – Adjust the brightness and contrast of the Main LCD and other LCDs on the front panel; calibration of
external touch screen monitor; screen timeout.
• Peripheral - Allow mouse or trackball to control pan and tilt parameters; adjust control wheel sensitivity.
• Inputs – Set up SMPTE and MIDI Timecode; Set CAN mode; MIDI Notes; Congure Remote Switches.
• Outputs – Map DMX universe to the physical DMX outputs on the desk.
• Behaviour – Conrm Overwrites; Recovery Mode; Preset Mixing; Keep Parameters Separate options.
• Memory Defaults – Set up the default delay and fade times for each attribute (Intensity, Colour, Beamshape,
Position); Move on Dark parameters.
• Submaster Defaults – Set up default options for ash button action, trigger level and attribute fade times.
• Set Date – Set the date on the desk.
• Set Time – Set the time on the desk.

Zero 88 Solution Specifications

General

Brand	Zero 88
Model	Solution
Category	DJ Equipment
Language	English