Damage to the inverter due to electrostatic discharge
•Touching electronic components can cause damage to or destroy the
inverter through electrostatic discharge.
• Ground yourself before touching any component.
Damage to the seal of the cover in sub-zero conditions
• If you open the cover in sub-zero condition,the sealing of the cover
can be damaged.This can lead moisture entering the inverter.
• Do not open the inverter at ambient temperatures lower than -5℃.
• If a layer of ice has formed on the seal of the cover in sub-zero
comditions,remove it prior to opening the inverter(e.g. by melting the
ice with warm air). Observe the applicable safety regulation.
To Next Page
