MicroPro 23
© gbo Medizintechnik AG Version 1.4
6.2 Moving the device
To move the device, establish the transport position by aligning the support arm vertically
upwards. Remove the mains plug and loosen the lockable castors. Now the device can be
moved in all directions.
Caution!
Due to the possibility of overbalancing, the device must always be moved
in transport position with the holding arm pointing vertically upwards.
To overcome a threshold, move the device slowly over it and, if necessary, lift the device
slightly.
6.3 Positioning the radiator
• Position the required radiator on the part of the body to be treated according to the
medical indication. Please note the following information:
Caution!
Please note that positioning of the radiator may only be made when the
power is switched off!
Local overheating can occur with the presence of metal foreign bodies (e.g. earrings, me-
tallic implants) in the electromagnetic field.
To Next Page
Loading...
