Zimmer MicroPro - MicroPro Technical Specifications

MicroPro 43
© gbo Medizintechnik AG Version 1.4
13 Technical data
Supply voltage:
230 V~ (Modifiable to 115 V~)
Supply frequency:
50/60 Hz
Power consumption:
900 VA
Mains fuses:
2× T4A H 250V, Glass fuse 5 × 20 mm
Output frequency:
2.45 GHz ± 1.5%
Output power:
200 W ± 20 %, continuous mode, in 10 W increments
200 W AVG in pulsed mode
Accuracy of timer:
± 2 %
Type of radiation:
Non-ionizing
Applied part:
Complete applicator
Type of applied parts:
B
Load Impedance:
50 Ω
Mode of operation:
Continuous
MDD device class:
IIa
Protection class:
I
IP class:
IP X0
Dimensions*:
1110 x 450 x 530 mm (h × w × d)
Weight:
44 kg
Display:
12.1“ TFT with capacitive touchscreen
Battery:
CR 2032
Measurement of the rated
output power:
HF power meter
Environmental conditions:
Operation
of the de-
vice:
Temperature range +10 ... +35°C
Relative humidity 30 ... 75 %
Air pressure: 780 … 1060 hPa
Transport
and stor-
age:
Temperature range -10 °C ... +50°C
Relative humidity < 90 %, not condensing
Air pressure: 730 … 1060 hPa
* Without radiator, support arm and radiator cable
By request, spare parts list and circuit diagrams can be offered to technical personnel for
repair purposes.
The mains inlet is used for all-pin disconnection from the mains power supply. Make sure,
that the mains inlet is easily reachable to the operator.
The exchange of the battery is described in the service manual.