ZKTeco C2-260/inBio2-260 User Manual

C2-260/inBio2-260 Access Control Panel User Manual
Page | 23 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
5 ZKBioAccess
The following sections explain the functions of ZKBioAccess software after the Access Controllers are
installed.
Login 5.1
After installing the software, double-click the ZKBio Access icon to open the software. You may also
open the recommended browser and enter the IP address and server port in the address bar. The IP
address is http://127.0.0.1:8098
by default.
If the software is not installed in your server, you may enter the IP address and server port in the address
bar.

Note: The username of the superuser is admin, and the password is admin, then click Login. After
logging in for the first time, you need to reset your password.
Activate the System 5.2
Please refer to the corresponding license activation document.
Modify Password 5.3
You can modify the login password in the Personal Information section.

ZKTeco C2-260/inBio2-260 Specifications

General

Brand	ZKTeco
Model	C2-260/inBio2-260
Category	IP Access Controllers
Language	English